我国的冷库种类较多，冷库设计分类缺乏统一标准，建设一座合适的冷库，我们建议您根据自已存放货物的吨位、每天的进货出货量和建筑物的大小确定。 冷库设计时要考虑冷库的大小（长×宽×高），确定库门的规格尺寸，门的开启方向，冷库的安装环境应是否清洁、干燥、通风。冷库设计根据自已的建筑物的特点和本地的水源情况，选择制冷机的制冷方式。一般有风冷和水冷。对于设有铁路专用线的新建冷库安装工程，其扩建库房位置宜留在专用线的两侧。
Our country's cold storage sort is more, refrigerator design classification lack of uniform standards, to build a suitable cold storage, we recommend that you deposit according to their cargo tonnage, daily incoming shipments and determine the size of the building. Refrigerator design should consider the size of cold storage (length x width x height), determine the size of the library door, door open direction, whether the installation of cold storage environment should be clean, dry and ventilated. Refrigerator design according to the characteristics of its own building and local water situation, choose the refrigerator refrigeration way. Generally speaking, there are air cooling and water cooling. For newly built cold storage installation with railway private sidings, the expansion of both sides of the warehouse location should be in private.
冷库安装工程库房布置应符合下列要求：
Cold storage installation project warehouse layout should meet the following requirements:
一、应满足生产工艺流程要求，运输线路要短，避免迂回和交叉；
One, should meet the requirements of production process, short transportation lines, avoid detours and cross;
二、冷藏库间柱网尺寸和净高应根据建筑模数和货物包装规格、托盘大小、货物堆码方式以及堆码高度等因素确定；
Column grid size between the two, cold storage and clear height should be according to the construction module and packing specifications, pallet size and cargo way of stacking and stack height to determine;
三、冷库应按不同的设计温度分区、分层布置；
Three, cold storage partitions according to different design temperature, layered arrangement;
四、冷库工程建筑的设计应尽量减少建筑的外表面积。
Four, cold storage engineering architectural design should minimize the surface area.
本文由医药冷库制冷设备有限公司发表提供，详情请参考公司官网http://www.sddslk.com/
鲁公网安备 37010402001149号 网站地图 XML
