一、冷库建造的具体步骤：

First, the concrete steps of cold storage construction:

1.安装库体。库体一般可以分为小型库体和大型库体，小型库体基本上是用库板拼装的组合冷库，大型库体多是用土建冷库，拼装或者是建造好的库体一般要求要平整，紧密结实，无空心感，承重，防冻，防潮，等都要符合工程要求。

1. install library body. The reservoir body can generally be divided into small and large library library, a small library body is basically the combination of cold storage plate assembly, large base body is cold storage construction, assembly or base body build good general requirements should be smooth, dense, hollow, bearing, antifreeze, anti surge. Are to meet the engineering requirements.

2.准备工作，食品冷库准备好冷库的工程规划，准备好施工场地和施工材料。冷库施工的各种材料都是根据客户需要来定制的，整理出符合要求的施工场所，把所有安装材料运到施工场地，核对材料质量和型号，确认无误后开始安装冷库。

2. preparation, preparation of cold storage project planning, preparation of construction site and construction materials. All kinds of materials of construction of cold storage are customized according to customer needs, sorting out the construction site in accordance with the requirements of the installation, all the materials transported to the construction site, check the material quality and type, the confirmation after the start of the installation of cold storage.

3.连接制冷系统。要用电线，铜管等把冷库的制冷机组，电控系统等部件连接起来，连接管道要连接紧密，并且有相应的保温、保护措施。

3. connect the refrigeration system. It is necessary to connect the refrigeration units, electric control systems and other parts of the cold storage with wires, copper pipes, etc. the connecting pipes need to be closely connected and have corresponding thermal insulation and protective measures.

二、冷库的维修和日常维护保养

Two 、 cold storage maintenance and routine maintenance

1.密封保护.由于装配冷库是有保温板块拼成的，因此板之间存在一定的缝隙，施工中这些缝隙会用密封胶密封，防止空气和水分进入，所以在使用中对一些密封失效的部位及缝补，要坚决出现逃冷的情况出现。

The 1. seal protection. Because there is a cold storage insulation plate assembly together, so there is a certain gap between the board, in the construction of these cracks will be sealed with sealant, to prevent air and water to enter, so in the use of some parts of the seal failure and sewing, resolutely fled the situation appears cold.

2.冷库及制冷设备安装完毕或者长期停用后，再次使用，应进行全面的检查，在指标都正常的情况下，有技术人员的指导放可启动使用。

2. cold storage and refrigeration equipment installed or long-term use again after stopping, should conduct a comprehensive inspection, in the indicators are normal circumstances, there are technical personnel guidance, you can start using.

3.保温保护.使用中注意硬物都冷库的碰撞和刮划，因为可以造成凹陷和锈蚀，严重的会造成局部保温性能降低。

3., heat preservation. Use in the attention of hard objects are cold storage collision and scratch, because it can cause pitting and corrosion, serious local insulation performance will be reduced.

本文由食品冷库的友情奉献.更多有关的知识请点击:http://www.sddslk.com/我们将用最先进的技术.最真诚的态度.为您提供最为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This paper consists of food storage friendship devotion. More related knowledge please click: http://www.sddslk.com/ we will use the most advanced technology. The most sincere attitude, to provide you with the most comprehensive service. More related knowledge and we will continue to offer. Please look forward to.