冷库根据现场的使用要求和通道宽度的限制有推拉门，平移门，电动门，卷闸门，弹簧门等形式，其中最常见的就是推拉门。

Cold storage according to the site requirements and channel width restrictions, there are sliding doors, translation doors, electric doors, roll gate, spring door and other forms, of which the most common is the sliding door.

平移门主要用于通道宽度受到限制，推拉门无法完全打开以及需要比较大的通道时，门可以做到比较大，大的设备与搬运工具可以自由出入。

The translation door is mainly used for the limitation of the channel width, the sliding door can not be fully opened and the larger channel is needed, the door can be made larger, and the large equipment and the transporting tool can freely enter and leave.

冷库由于要做隔热层，一般为保护隔热层会做到高于地面3-5厘米距离，加上隔热层的厚度，与外面的完成地面形成台阶，但这种结构安装和搬迁比较方便;另外一种是将冷库内部与外部地面完成而做成一样高，甚至在隔热层之上用同样地面材料制作，这样冷库无法搬迁，但人及搬运工具进出冷库比较方便。

Due to the cold insulation protection for general insulation layer will be higher than the ground 3-5 cm distance, thickness of insulating layer coupled with the outside of the ground to form a complete step, but the structure is convenient installation and relocation; another is the cold inside and outside ground and made the same high, even in the heat insulating layer by making the same above ground material, so cold and unable to move, but the handling tool import and more convenient storage.

每个冷库独立使用一套库体，六面体每一面分别设计隔热结构，与外界空间分离，这种结构安装方便，搬迁安装也容易。

Each refrigeratory independently uses a set of warehouse bodies, and each side of the hexahedron is respectively designed with heat insulation structure, which is separated from the outer space. The structure is easy to install and easy to move and install.

两个或以上冷库共用相邻库体部分，在相邻库体可开门连通也可单独开门，独立使用，这种结构在安装时和搬迁时都需要较高的精度，但可以节约库体隔热材料的用量。

Two or more adjacent storage shared library body part in the adjacent base body can open the door can also be individually connected to open the door, independent use, this structure is high in the installation and removal of the accuracy, but can save the amount of insulation material storehouse.

一般冷藏库库温在零下22℃的库板用100mm厚隔热层，零下22℃以下的冷库要用150mm厚的隔热层。零下30℃以下采用200mm毫米厚的隔热层。

General refrigerated Kukuwen in Library Board - 22 C with 100mm thick insulation layer, minus 22 DEG C to use cold storage insulation layer thickness of 150mm. Use 200mm mm thick insulation layer below 30 degrees below zero.

隔热材料一般采用环保聚氨酯发泡材料，也有的用聚苯乙烯发泡材料。成型基板板材的选择：前常用发泡成型的外表保护材料主要有彩钢板，镀锌钢板，花铝板，在较高要求的场合或特使用途的场合会用到不锈钢板。

Heat insulation material usually adopts environmental protection polyurethane foaming material, and others use polystyrene foaming material. The choice of forming substrate sheet: before the general use of foam forming surface protection materials, mainly color steel plate, galvanized steel sheet, flower aluminum plate, in higher demand occasions or special envoy occasions will use stainless steel plate.

本文由食品冷库为您提供，我们的网站是:http://www.sddslk.com/我们将以全心全意的热情为您提供更优质的服务，欢迎您的访问!

This article from the food cold storage for you, our website is: http://www.sddslk.com/, we will wholeheartedly provide you with better quality of service, you are welcome to visit!