2016-01-07 13:58:16

冷库安装过程中需要注意的细节问题：
Cold storage installation process need to pay attention to the details of the problem:
1、冷藏库机组安装冷库机组位置离蒸发器越近越好，且易维修，散热良好，如外移需安装遮雨棚，冷库机组位四角需要安放防震垫片，安装水平牢固，不易被人碰着。
1, the cold storage system with cold storage installation position as close to the evaporator, the better, and easy maintenance, good heat dissipation, such as offshoring need to install the canopy, cold storage units need to put in the four corners shockproof washers, installation level and firm, not easy to be touched.
2、冷库建造的制冷系统连接因冷库机组的冷凝器、蒸发器在厂里都经过打压密封，因此开封时，都应有压力，可查是否有漏，出厂铜管应两头有封尘措施，施工时也要注意随时密封，以防水灰尘进入管内，冷凝器→冷库主机→蒸发器，铜管连接以焊接方法，接口牢固美观。
2, built cold storage refrigeration system connection because of the cold storage unit condenser, evaporator have been suppressed sealed in the factory, so in kaifeng, should have the pressure, to check whether there is leakage, factory copper pipe should be two head seal dust measures, also should pay attention to during the construction of seal at any time, to waterproof and dust into the tube, to cold storage host, evaporator, condenser copper pipe connected to the welding method, the interface is strong and beautiful.
3、电线排放所有电线除用空调扎带扎好外，需用波纹软管或走线槽穿管保护，温度显示导线尽量不与电线靠在一起排线。

3, electrical, emissions all wires, besides using air conditioning cable tie fasten with corrugated hose or go trough wear protection, temperature display wire try not together ribbon cable and wire.

本文由食品冷库设备有限公司发表提供，详情请关注公司网址：http://www.sddslk.com/

上一条:冷藏库保温材料的选择
下一条:食品冷库设备有限公司介绍小型冷库的库体