2015-12-15 17:44:15

1、储存温度要求高的物品时，需要设定好温度参数，且库内温度达到设定值后才可以放入药品。
1, the storage of high temperature requirements, the need to set a good temperature parameter, and the temperature inside the library to set the value can be placed into the drug.
2、药品放置的要求：物品不能将风扇进出口堵塞，物品与物品之间、物品与恒温库内壁之间必须有10mm以上的空隙，以利于库内温度的均匀。
2, drug placement requirements: goods can not be blocked, and the fan out of the mouth, goods and goods, goods and the wall between the constant temperature library must have 10mm above the gap, in order to facilitate the temperature of the library.
3、药品冷藏库设定的温度与箱内温度相差大时，则需要一定时间调整。一般情况下，可能需要1-2小时温度更为准确。
3, the temperature and the temperature difference between the cold storage warehouse and the temperature of the medicine storage warehouse need some time to adjust. Under normal circumstances, it may be more accurate for 1-2 hours.
4、药品冷藏库在设定的恒温过程中，具体高低温报警功能；即显示温度最低到0℃。
4, the drug storage in the setting of constant temperature process, the specific high and low temperature alarm function; that is, the lowest temperature to 0 degrees celsius.
5、药品冷藏库具有安全锁功能。
5, drug storage with safety lock function.

上一条:介绍食品冷库常用的两种库板
下一条:介绍制冷剂的5大相关性能